top of page

MAINTENANCE
& RECHARGE

Gas analyzers, recovery units, vacuum pumps,

Acidity tests, A/C performance enhancers,

 

Pressure measurement tools and all that is needed for

a complete maintenance of the A/C system.

Gas polymeritazion
Elke A/C recovery guard/
Elke A/C charge protector -auto

Were developed to protect equipment and A/C systems from the phenomenon of HFO R-1234yf gas polymerization.

13.010_AC RECYCLE GUARD_in valigia.png
valigia-01.jpg
GAS POLY
IMG_0464 copia.jpg

Mini ID
Mini ID Refrigerant identifier
R-134a/R-1234yf  

Certified to 

UL 61010-1

CSA C22.2 

IEC 61326-1 

MINI ID
PERFORMANCE

Performance Improvement
Acidity Test, neutralizers and more

Acidity tests, acidity neutralizers for mineral and ester oils, A/C performance enhances, de-icer and anti-moisture additives.

performance-01-01-01.jpg
13.705_GAS CHECKER 2022.png
valigia-01.jpg

the GAS CHECKER is an HFC R-134a and HFO

R-1234yf refrigerant gas analyzer module.

This portable device is able to analyze the gas contained in an external cylinder or inside the system of a car, establishing the degree of purity and if anything is contaminating the gas.

R-134a / R-1234yf
Gas analyser

GAS ANALYZ

Recovery Unit
Refrigerant  Recovery/Recycle

Recovery and recycling station for all types of refrigerant gases, both in gaseous and liquid form.

 

Equipped with a separator that allows the oil to be separated from the refrigerant.

RECOVERY-01-01-01.jpg
RECOVERY SCHEMA-01-01.jpg

Modern Room Decor

RECOVERY UNIT
VACUUM PUMP
V PUMP-01-01-01-01.jpg
VALVOLA-02-02.png

Vacuum of A/C systems
Vacuum pump oil R-134a / R-1234yf

The worst enemy of air conditioning systems is water and/or humidity in the air.

 

Making the vacuum of the the system before a maintenance and/or recharging operation of the air conditioning system is essential to eliminate the air present in the piping of the circuit

Pressure Measurement
Pressure Gauges & Manifolds

Pressure gauges are essential devices for most A / C system maintenance interventions, thanks to which we can always keep the system pressure under control.

 

Useful for diagnosis, maintenance, as well as charging and discharging the refrigerant gas.

manifold-01.jpg
PRESSURE MEASUREMENT
HOSES

Hoses
straight/45°and 90° connections

􏰍􏰆􏰇􏰝􏰔Range of flexible hoses in 2 colors ( Red and Blue) for connecting machinery and equipment

to Automotive A/C systems.

FITTINGS

Fittings&Sealing Tools
Quick couplers, Adapters, Caps, Sealing gaskets...

Discover our selection of :

adapters, reductions, connections and quick couplers to connect hoses, equipment, cylinder adapter, caps, sealing tools, valve cores and o-rings.

IMG_3682_edited copia.jpg
OREFICE
INSULATION
air_conditioning_parts_for_cars_af0f302c-1404-437c-8ac2-00998102acaf_1200x1200.jpeg

Orifice tubes
solutions for maintenance & repair 

The orifice tube is a tube with a specific length and

cross-section which expands the refrigerant but, unlike the expansion valve, it does not regulate flow rate and overheating.
 

Insulation & protection
solutions for maintenance & repair 

Tools for lining and protecting pipes, fittings, valves,

etc ...

Special tape suitable for covering and insulating the various system components from both heat and cold.

tape-01-01.jpg
CUT&CRIMP
AUTO21 UK.IT_300ppi_xstampa-02.jpg

Cut & Crimp
solutions for maintenance & repair 

Everything you need to bend and cut hoses by yourself.

Our hydraulic crimper comes with a complete set of dies covering hose sizes #6, #8, #10, #12 and reduced barrier #6, #8, #10 and #12.

Temperature
measurement

pen / infrared / proba /thermo hygrometer

In this section you can find a series of Electronic tools  to measure the temperature of surfaces and air ducts.

IMG_2812 4.jpg
TEMPERAT MEAS
FILTRI-01-01-01.jpg

Maintenance of
Recovery & Charging stations 

Selection of spare filters for recovery and charging stations.

 

Our maintenance kits for recovery and charging stations include a 500 ml bottle of lubricant (ISO 68 viscosity) for vacuum pump, a 100 ml bubble leak detection spray to check any leaks after reconnecting the system, 4 HNBR gaskets 􏰆􏰓􏰎to be replaced on the recovery and charging station.

 

Select the filter you need for your charging station and find the relevant kit code below.

 

MAINTENANCE KIT
CODE
CODE ANALYZE
CODE VACUUM
CODE PRESSURE
bottom of page